Document Actions
News
Up one levelFEKO at IMS 2008
FEKO exhibited at the International Microwave Symposium (IMS) 2008 held at Atlanta, Georgia.
FEKO at 4th Annual Military Antennas, May 2008
FEKO exhibited at 4th Annual Military Antennas during May 6-7, 2008 at Washington DC (USA)
FEKO exhibited at COMCAS 2008
FEKO exhibited at IEEE COMCAS in Tel-Aviv, Israel, building on the new partnership with GALOR-MIC's Victor Sharir to grow FEKO's influence and services in Israel.
Multi-core CPU licencing policy changes
The licencing policy for parallel processing is changed with FEKO Suite 5.4 to count CPUs, rather than cores. A sequential licence can now simulate in parallel on all cores of a single CPU. A parallel licence can simulate in parallel on all the cores of the number of CPUs that it is valid for.
FEKO exhibited at ACES 2008
FEKO was exhibited at The 24th International Review of Progress in Applied Computational Electromagnetics (ACES 2008) in Niagara Falls, Canada from March 30 to April 4, 2008
FEKO Exihibited at Advances in Automotive EMC Test and Design: A Colloquium and Exhibition
On March 12, 2008, FEKO was exhibited at Advances in Automotive EMC Test and Design: A Colloquium and Exhibition. This was a one day workshop orgnaized by Clemson University International Center for Automotive Research (CUICAR).
FEKO at AMTA 2007
FEKO was exhibited at the 2007 Antenna Measurement Techniques Association (AMTA) conference
FEKO at Antenna Systems Conference 2007
FEKO exhibited at the 2007 Antenna Systems/Short Range Wireless Conference in Denver, Colorado.
FEKO at Military Antennas, 2007
FEKO was the main sponsor at the Military Antennas Conference 2007 in Washington, DC
FEKO Certified Intel Cluster Ready
FEKO works closely with Intel to achieve the best possible performance from cluster computing environments. In this endeavour, Intel recently certified FEKO as "Intel Cluster Ready".
FEKO at ISAP 2007
FARAD Corporation (FEKO distributor in Japan) exhibited FEKO at ISAP 2007 conference.
FEKO Distributor Conference 2007
A conference was held for FEKO distributors to discuss the future of our product.
FEKO at ACES 2007
FEKO exhibited and presented technical papers at the past ACES conference in Verona, Italy.
Suite 5.2 release
Major highlights include: Complete problem setup and solution control in CADFEKO, Re-meshing, Excitation in the FEM region, Coaxial cable analysis. (August 2006)
Suite 5.1 release
Suite 5.1 is released with the following major highlights include parallel MLFMM, waveguide port excitation, CAD import filters. (December 2005)
Distribution and Support: Taiwan
An agreement has been signed in terms of which FEKO will be distributed and supported by Taiwan Auto-Design Corporation.Ltd in Taiwan. CADMEN has been in the EDA business since the early 90's and their experience in simulation technology will prove to be very usefull to all the FEKO customers in Taiwan. (December 2005)
CADFEKO is released
Suite 5 is released with a completely new Graphical User Interface. CADFEKO (interactive geometry defiinition and meshing), EDITFEKO (solution control) and POSTFEKO (data post-processing) are all available on Windows and Linux. (July 2005)
FEKO at IMS 2008
IEEE APS & URSI 2008